Oliver 6510, Owner'S Manual

Page: 18 / 38

4. OPERATION 4-8
4.2.10. Adjustment of mill head assembly speed
Change gear ratio of motor (A) shifting the belt
(B) on pulleys (C, D).
4.3. WORKING CYCLE
Locking workpiece takes place with a 4 mm travel of the piston. Such small gap
prevents operator's fingers to get caught between pusher and workpiece inadvertently.
Machine operator must pay maximum attention in the workpiece locking area
because clamping takes place at a working pressure of 0.6 mpascal.
)
It is possible to operate in a semiautomatic mode, working male and female parts
individually.
A
B
C
D