Oliver 6320, Owner'S Manual, Page: 20 / 56

20 | Page Oliver Machinery 6320 Sander
Leveling the Sander
This sander should be positioned on a level, stable floor. If
the machine is rocking on the floor or if it vibrates
excessively during operation, please adjust the rubber
leveling feet with a 19mm wrench to level the machine.
Test the adjustments to make sure the machine does not
rock on the floor.
Dust Collection
This sander can generate a lot of dust. Connect this
machine to a dust collection system. Whenever possible,
use the sander with the sanding belt guard closed to
maximize dust collection efficiency.
The minimum CFM requirement for this sander is 650 CFM
at the dust port, which means the dust collection system
should have a rating greater than 650 CFM, as air friction
and leakage can reduce effective CFM at the dust port.
IMPORTANT
Running this sander without a dust collection system or using a dust collection
system with inadequate suction may damage the machine and cause other
hazardous situations. Check your dust collection system regularly to make sure it
is not jammed or filled up.