Oliver 6320, Owner'S Manual, Page: 19 / 56

6320 Sander OLIVERMACHINERY.NET 19 | Page
Side Table Installation
1. To maximize dust collection efficiency, only
install the side table for contour sanding
work.
2. Loosen the lock knob to unlock the sanding
belt guard.
3. Use the buckle on top of the sanding belt
guard to keep the guard in the open position.
4. Install the side table lock knob onto the
mounting bracket.
5. Insert the end table post into the mounting
bracket. Align the groove of the post with
the lock knob.
6. Make sure the table is not catching the
sanding belt and the table is set above the
bottom edge of the belt. Then tighten the
lock knob to secure the table.
7. After using the side table, remove it from the
sander. Close and lock the sanding belt
guard.