OLiPower BRE-I-5K, User Manual

Page: 58 / 62

58
·
Or seek help from us, if not go back to normal state.
BMS Other Fault Battery other error
·
Wait for 5 minutes, check again.
·
Or seek help from us, if not go back to normal state
BMS Protect 0V Battery over voltage protect
·
Wait for 5 minutes, check again.
·
Or seek help from us, if not go back to normal state.
BMS Protect LV Battery under voltage protect
·
Wait for 5 minutes, check again.
·
Or seek help from us, if not go back to normal state.
BMS Protect Chr0C Battery over current charging protect
·
Wait for 5 minutes. check again.
·
Or seek help from us, if not go back to normal state.
BMS Protect
Disharge0C Battery over current discharging protect
·
Wait for 5 minutes., check again.
·
Or seek help from us, if not go back to normal state.
BMS Protect TemHigh Battery temperature is high
·
Wait for 5 minutes, check again.
·
Or seek help from us, if not go back to normal state.
BMS Protect TemLow Battery temperature is low
·
Wait for 5 minutes., check again.
·
Or seek help from us, if not go back to normal state
Remark
If your inverter's information panel is not displaying a Fault light, check the
following list to make sure that the present state of the installation allows proper
operation of the unit.
·
ls the inverter located in a clean, dry, and adequately ventilated place?
·
Have the DC input breakers been opened?
·
Are the cables adequately sized and short enough?
·
Are the input and output connections and wiring in good condition?
·
Are the configurations settings correct for your installation? Are the display
panel and the communications cable properly connected and undamaged?
Contact OliPower Customer Service for further assistance, please be prepared