OLiPower BRE-I-5K, User Manual

Page: 23 / 62

23
Connection Steps:
·
Disconnect the PV switch.
·
Remove the back cover of the PV waterproof switch box
·
Connect the cable (12AWG) through the connector marked "input" to the terminal
PV1 Connection 1+, 1- and PV2 Connection 2+, 2-
·
Then use the same specification cable to connect the other side of the PV switch
terminal, and connect to the inverter terminal through the waterproof terminal marked
"output" (Figure 5-6)
·
·
Figure 5-6
·
Reinstall the PV waterproof switch box and ensure the tightness of the PV
waterproof switch box.
·
Fix the PV waterproof switch box in a suitable position on the left side of the inverter
·
Trip 6mm of insulation from the Wire end.
·
5.7.2 Battery Connection
When you want to build a self-use storage system, the BRE-B-10K/ BRE-B-14K
battery is a necessary part. The inverter provides the necessary part of the interfaces
to connect the battery.
1. PV switch needs to be installed outside the inverter;
2. PV switch belongs to the accessories of the inverter, please look
for it in the accessories;
NOTICE