19
is authorised to carry out special maintenance and repairs on the water cleaner. Any work on is electrical
parts must be carried out by a Skilled Technician who is also a Qualified Eletrician, i.e. a person with
professional training who is authorised to check, install and repair electrical equipment correctly and
according to current regulations in the country where the water cleaner is installed.
• Total Stop: this stops operation of the water cleaner every time the control lever on the cleaner gun is
released.
• Easy Start: this aids starting up the water cleaner by lowering the pressure for the first moments of its
operation.
2 FEATURES AND TECHNICAL SPECIFICATIONS
PW 300 HC - IP 3000 HS
ELECTRICAL CONNECTION
Mains power supply
Absorbed power
Fuse
230 V / 1~50 Hz
2,7 kW
16 A
HYDRAULIC CONNECTION
Maximum inlet water temperature
Minimum inlet water temperature
Minimum inlet water flow
Maximum inlet water pressure
Maximum priming depth
40 °C / 98 °F
5 °C / 41 °F
700 l/h / 185 US gph
0,8 MPa / 8 bar / 116 psi
0 m / 0 ft
PERFORMANCE
Maximum water flow
Maximum pressure
Maximum water outlet temperature
Recoil of cleaner gun
Sound level
Operator arm vibrations
540 l/h / 143 US gph
15 MPa / 150 bars / 2176 psi
90 °C - 194 °F
21,4 N
82 dB (A)
1,7 m/s²
WEIGHT AND DIMENSION
Lenght x width x height
Weight
890 x 500 x 820 mm - 35 x 19,7 x 32,3 in
87 kg / 191,8 lb
Diesel tank capacity
20 l / 5,3 US gal
Detergent tank capacity
4,5 l / 1,2 US gal
All features and technical specifications are only indications.
The Manufacturer reserves the right to modify the appliance as it deems necessary..
2.1 Identification of Components
Please also refer to figures 1 to 2, which are located at the start of these operating and maintenance
instructions.
(continues on the next page)
1. Water inlet connector
2. Main switch
3. Hose reel ring nut
4. Hose reel
5. Hose reel knob
7. High pressure hose
9. Seat for water gun/lance hose
10. Plate “Read the manual before...”
12. Identification plate
13. Plate “Do not spray towards persons,...”
14. Power supply wire
16. Water gun
17. Lance hose
18. Nozzle-holding head
19. Nozzle cleaning hole
20. Nozzle
21. Lance stand
24. Water gun lever
25. Water gun lever safety stop
26. Handle
27. Water adjusting knob
28. Stack
29. Plate “Caution: Hot surfaces”
30. Pressure gauge
GB
Summary of Contents for PW 300 HC
