Oleo-Mac PW 300 HC, Operators Instruction Book

Page: 29 / 168

29
PROBLEMS CAUSES SOLUTIONS
No water comes out
from the nozzle (20).
Water missing. Check that the tap of the water network is
completely opened.
Water nozzle clogged. Clean and/or replace the nozzle according
to what mentioned in the section
“Features and technical specifications”.
The water cleaner stops
during the operation.
A safety device of the system
to which the water cleaner is
connected (fuse, differential
switch, etc.) has triggered.
Reset the protection device.
In case of a new triggering, do not use
the water cleaner and apply to a Skilled
Technician.
The amperometric protection
device has cut in.
Observe what mentioned in the section
“Safety devices”.
Rotating the main
switch (2), the motor
hums but does not start.
The electrical system and/or the
extension are not suitable.
Observe what mentioned in the section
“Checks and connection to mains
electricity supply”.
The water cleaner does
not supply hot water.
The Diesel in the tank is below
the minimum level.
Add Diesel
The Diesel filter is clogged. Observe what mentioned in the section
“Special maintenance”.
GB