![background image](http://html1.mh-extra.com/html/okidata/ol1200ex/ol1200ex_service-manual_3678465091.webp)
%4.1.3 Engine maintenance mode
4.1.3 Engine maintenance mode
• The engine maintenance mode is activated when the power is turned ON while pressing to the
Form Feed key and Enter key.
• This mode adopts the menu for function selection.
• The method for exit from this mode depends on the setting.
• The engine maintenance mode is provided with the following functions:
(1) Head drive time setting
• Sets the drive time of the LED head.
(2) Printing start position setting
• Sets the printing start position.
(3) Drum count total display
• Displays on the LCD the total number of drum revolutions in the unit counted at the engine.
(4) Drum count display
• Displays on the LCD the total number of EP drum revolutions counted at the engine.
(5) Setting of standard tray paper feed length
• This function sets the paper feed length of standard tray paper.
(6) Setting of front feeder paper feed length
• This function sets the paper feed length of the front feeder.
(7) Setting of High Capacity Second Paper Feeder paper feed length
• This function sets the paper feed length of the High Capacity Second Paper Feeder.
(8) Selection of High Capacity Second Paper Feeder download table
• This function selects the download table for the High Capacity Second Paper Feeder.
(9) Setting of Power envelope feeder paper feed length
• This function sets the paper feed length of the Power envelope feeder.
(10) Selection of Power envelope feeder download table
• This function selects the download table for the Power envelope feeder.
(11) Fuser count display
• Displays on the LCD the total number of printed pages counted at the engine.
(12) Fuser count reset
• When the fuser unit is replaced, the maintenance person uses this fuser count reset function to
reset the fuser lifetime.
• After the fuser counter is reset, the engine enters into the operation mode automatically
(13) Engine reset
• All EEPROM areas used by the engine are reset to the factory default values.
• The following items are excluded:
Menu level-1
Menu level-2
Operator panel menu disable/enable
Page print disable/enable
• Transition to the operation mode occurs upon completion of resetting.
Summary of Contents for OL1200ex
