![background image](http://html1.mh-extra.com/html/okidata/ol1200ex/ol1200ex_service-manual_3678465129.webp)
From on the preceding page .
From on the preceding page .
t
Yes
Is the image drum set properly?
No
Set the image drum properly.
t
Yes
In case of paper feed from the front feeder, check the hopping roller of the
front feeder assembly. In case of paper feed from the tray, check the hopping
roller assembly and the tray.
t
Yes
Has the paper reached the outlet sensor lever?
Yes
Does the outlet sensor lever operate smoothly?
No
Replace the outlet sensor lever.
t
Yes
Clean the outlet sensor on the Power/sensor board. (See Fig. 2-3 Sensor
Layout Diagram.)
t
Is the printer recovered?
No
Replace the Power/sensor board.
t
YES END.
t
No
Is the drum motor rotating?
No
Is there any defective gear in the motor bracket assembly?
Yes
Replace the defective gear.
t
No
Are the connections for CN3 connector on the Power/sensor board between
CN8 and CN6 connectors and drum motor, and for POWER connector and
FRONT connector (white 9-pin or 7-pin connector) on the Control board made
properly?
No
Connect these connectors properly.
t
Yes
Is the coil resistance (normal resistance between pins 1 and 2, between pins 3
and 4 : 4.3 W) of the drum motor normal?
No
Replace the drum motor.
t
Yes
Replace the driver board.
t
Is the printer recovered?
No
Replace the Control board.
t
YES END.
t
Go to on the next flow.
Summary of Contents for OL1200ex
