%8. White belts or streaks in the vertical direction
8
White belts or streaks in the vertical direction
Are the LED lens dirty?
Yes
Clean the LED lens.
t
No
Is the contact plate of the transfer roller contacted with the power/sensor board
properly?
(See Figure 6-6.)
No
Make the contact plate contact with the power/sensor board properly.
t
Yes
Replace the transfer roller. (See 3.3.36.)
Has the trouble been removed?
Yes
End
t
No
Is the LED head installed properly?
(Cleck CN4 connector HEAD1 (14p), HEAD2
(12p) on the control board and PC connector on
the LED head.)
No
Install the LED head properly.
t
Yes
Replace the LED head.
Has the trouble been removed?
Yes
End
Note:
After replacing the LED head, set the printer in the engine maintenance
mode by turning the power on while pressing the FORM FEED and
ENTER keys. Set the LED head drive time.
(Refer to Section 4.2.)
t
Yes
Replace the image drum cartridge.
Has the trouble been removed?
Yes
End
Note:
After replacing the image drum cartridge, set the printer in the user
maintenance mode by turning the power on while pressing the MENU
key. Reset the drum counter. (Refer to Users Manual.)
t
No Replace the control board or power/sensor board.
Summary of Contents for OL1200ex
