Oki OKIFAX4550, Maintenance Manual

Page: 531 / 592

41309401TH Rev.4
531 /
All data
User data
Serviceman data
TEL number data
Program/Language/Default data
User data
Serviceman data
TEL number data
5.2.1 Loading
To load file-format data from the RMCS (maintenance work PC) to the target FAX device.
The data in the target FAX device is replaced with the loaded data.
1) Select items to load at the [File[LOAD(
→
FAX)]] sub-menu on the [Remote Operation] menu.
2) (File loading.)
3) Select the [Disconnect] sub-menu on the [Remote Operation] menu to close the circuit.
* You can select a new item on the [Remote Operation] menu without disconnecting the line.
4) Confirm that OFFLINE is displayed on the Model Main screen.
5.2.2 Saving
To upload the file-format data from the target FAX device in the RMCS (maintenance work PC) and
save.
The data that is saved in the RMCS is replaced by the newly saved data.
1) Select the [FILE[SAVE(
→
HD)]] sub-menu on the [Remote Operation] menu.
2) Select a driver and a folder to save at the dialog screen.
3) (File saving.)
4) Select the [Disconnect] sub-menu on the [Remote Operation] menu to close the circuit.
* You can select a new item on the [Remote Operation] menu without closing the circuit.
5) Confirm that OFFLINE is displayed on the Model Main screen.
5.2.3 Editing
To edit/set contents of data on the target FAX device from the RMCS (maintenance work PC) side
You can also save the data you edited/set in the RMCS. In this case, the data saved in the RMCS
is replaced with the data you have just saved.
1) Select an item to edit/set at the [EDIT(ONLINE)] Sub-menu on the [Remote Operation] menu.
2) The dialog screen for User/Serviceman/Telephone number data appears.
3) Edit/set the contents of data.
Updating the data on the target FAX device side:
4)
Press the LOAD button.
5) (File loading.)
6) Select the [Disconnect] sub-menu on the [Remote Operation] menu to close the circuit.
* You can select a new item on the [Remote Operation] menu without closing the circuit.
7) Confirm that OFFLINE is displayed on the Model Main screen.
Updating the data on the RMCS (Maintenance work terminal) side:
4)
Press the SAVE button.
5) Select a drive and a folder at the SAVE dialog screen and press the OK button.
6) Select the [Disconnect] sub-menu on the [Remote Operation] menu to close the circuit.
* You can select a new item on the [Remote Operation] menu, without closing the circuit.
7) Confirm that OFFLINE is displayed on the by the Model Main screen.