Oki OKIFAX4550, Maintenance Manual

Page: 102 / 592

41309401TH Rev.4
102 /
Table 2.6 (3/7) User's Functions
No. Item Specifications
3) Keypad dial
4) Chain dial
5) Mixed dial
2 Manual dial
3 Receive mode
1)
Auto receive mode
2) Manual recevice mode
3) Telephone/fax automatic
switchover
Max. 32 digits for each location number for OKIOFFICE87.
Max. 40 digits for each location number for OKIOFFICE87.
Note 1: If a telephone number is registered, data can be
registered without registering ID and communication
parameters.
2: E-mail or Web cannot be registered in abbreviated
dials.
3: At registration, the following areas are initialized.
(However, they are not initialized at entry of the
same number.)
• Redial/ Communication parameters/Learning parameters
With ten-key pad.
Max. 40 digits for one operation
The number of dialling digits can be expanded to longer digit
numbers by chaining any number of the above 1), 2) and 3).
Type of dialling can be changed from pulse dial to tone dial
halfway in dialling process.
The changing point is specified by the * key. This feature is
not available in all countries.
With a telephone handset.
Selectable by key operation.
Selectable by key operation.
Selectable by key operation.
The fax recognizes a fax call from a verbal call as follows:
If the fax detects a call with a CNG signal, it starts an automatic
document receive operation.
If it detects a call without a CNG signal, it sounds the buzzer
to indicate a voice call. Operator can answer the call by lifting
the telephone handset.
If he or she does not lift the handset within predetermined time
(20 sec. or 35 sec.), the fax automatically starts a document
receive operation.
* FP + 10 (To determine the timer.)
Note: Refer to page 115.