Oki OKIFAX4550, Maintenance Manual

Page: 105 / 592

41309401TH Rev.4
105 /
Table 2.6 (6/7) User's Functions
No. Item Specifications
The fax can temporarily store received messages in memory
when toner has run out. The messages are printed when
toner has been newly supplied or an operator presses the
SELECT FUNCTION key followed by the one-touch key No.
2 under the LCD message “PRINT MEMORY MSG.” in the
standby mode.
*FP + 22 (To enable or disable this function)
The documents received in the STD mode can be printed at
the FINE resolution by means of generating one line based on
the two consecutive original lines and printing it between
them.
The documents for transmission can be read into the memory
even while the fax is engaged in another memory transmis-
sion, reception in the ECM or non-ECM mode.
1) Operation of memory transmission while the fax is en-
gaged in a communication (memory TX, memory RX or
print mode RX).
2) Copy while the fax is engaged in a communication (memory
TX or memory RX).
Note:
Condition for operation
a) Copy is invalid when the machine is already engaged
in an operation which is using or could use the printer.
3) Call reception while the fax is engaged in scanning
documents for memory transmission when the auto re-
ceive mode is in “FAX” or “T/F” mode, although “TEL”
mode is not valid.
Refer to sub-section 2.9.7 for dual access operation.
For the patterns of dual access refer to the following, Dual
Access Combination Table.
17 No toner reception
18 Smooth printing
19 Dual Access