Oki OKIFAX4550, Maintenance Manual

Page: 215 / 592

41309401TH Rev.4
215 /
Table 6.3 (2/3) Service Codes List
Code Description
29C1 In closed Network setting, TSI/CSI is either not received or, if received, it is not autho-
rized one.
29E0 Contents of CM/JM are faulty at receive side.
29E1 Phase 2 time out at receive side.
29E2 Phase 3 time out at receive side.
29E3 Training time out of phase B control channel at receive side.
29F1 In Relay Broadcast Reception, the relay password is unmatched.
39A0 The number of continuous-error lines have exceeded the specified limit.
39A1 The number of random-error lines have exceeded the specified limit.
39B0 Memory Overflow has occurred while receiving in memory.
39B1 Memory Overflow occurred during Confidential Reception.
39B2 Memory overflow occured during Relay Broadcast Reception.
39C0 DECODER hardware error. (cannot reproduce picture)
39C1 DECODER hardware error. (cannot detect end of picture)
41A0 There was no response each time in response to the three post commands.
41A6 Received signal other than the desired signal in responce to the post command.
41A9 Fall back in Phase C is not possible.
41C8 T5 time out.
41CE Received negative signal in response to the post command.
41E0 Control chanel data. Time out in Phase D.
49CC Received signal other than the desired signal in response to RNR.
49CD Command not received in response to RNR.
49CF In Relay Broadcast Reception, reception is interrupted due to defective image quality.
49E0 Data time out of
49E1 Fall back in Phase C is not possible.
60A0 Broadcast completed.
6803 DCN received in response to NSF/DIS without sending a single picture.
9080 Pressed STOP key.
9081 T1 time out.
9082 T2 time out.