Oki OKIFAX4550, Maintenance Manual

Page: 214 / 592

41309401TH Rev.4
214 /
Table 6.3 (1/3) Service Codes List
0000 Successful end of communication.
1080 STOP key has been pressed while calling a remote fax.
10A2 Busy tone detected.
14C0 Dial tone not detected.
14C1 Line current not detected.
14C2 Calling-and-waiting for line connection time out.
14C3 Dialling limit time out.
14D0 DTMF tone “D” is received from the Fax2Net Server.
14D1 Wait time out upon DTMF tone “A” is not received from the Fax2Net Server.
14D2 Wait time out upon DTMF tone “B” or “D” is not received from the Fax2Net Server.
21A0 Received signal other than DIS/DTC.
21A1 Contents of received DIS/DTC are faulty.
21A3 Each time there is no response from the receiver for sending TCF three times.
21A4 TCF fall back is not possible.
21A5 Received signal other than the desired signal in response to sending TCF.
21B0 Transmitter tried to transmit by confidential transmission function but the remote fax has
not the capability of confidential reception.
21B1 Transmitter tried to transmit by Broadcast Initiate function but the remote fax has not
the broadcast capability.
21C0 In Closed Network setting, TSI/CIG/CSI is either not received or, if received, it is not
authorized one.
21E0 Contents of CM/JM are faulty at transmission side.
21E1 Phase 2 time out at transmission side.
21E2 Phase 3 time out at transmission side.
21E3 Training time out of phase B control channel at transmission side.
29B6 In Confidential Reception, the mail box specified by transmitter is not set up and open.
29B7 In Relay Broadcast Reception, the specified group number is erroneous.
Code Description
6.16.1 G3 Service Code List