OKIFAX 5700/5900
G - 4
3.
PC Loading Procedure
3.1
PC Loading upon Memory Error Occurrence
3.1.1 Explanation on Procedure
The PC loading procedure when the LCD on the MFP displays “MEMORY ERROR” for a hash
NG state due to one reason or another is explained below.
(1)Activate the MS(PC)-DOS with the host PC and the MFP connected via the Centro cable.
(2)Input the copy command from the MS(PC)-DOS on the PC to output the loading data file in
binary specification to the LPT1 in order to transfer the loading data to the MFP.
Example:
>copy/b xxx.x LPT1 (xxx.x is the loading data file name.)
(3)The user shall judge the normal end of data loading by checking the normal end of file
output on the PC and sounding of the buzzer indicating the normal end on the MFP. If the
MFP displays an error on the LCD, sounds the buzzer for an error or lights up the alarm
LED, the user shall judge abnormal end of data loading from the PC and repeat the proce-
dure from step 2 after turning the MFP power off once and to on again.
3.1.2 Procedural Sequence Diagram
PC
MFP
MS(PC)-DOS in activated state
Check by LCD indication
“MEMORY ERROR” display in the upper
row on the LCD upon hash NG detection
Start of loading data transfer by
means of the copy command
after checking the LCD display
Waiting for transfer
Loading data
“PC LOADING” display in the upper row and
“RECEIVING” display in the lower row on the
LCD during data receiving
Hash check and flash memory update
after the end of receiving
Return to DOS prompt upon
completion of transfer
End buzzer sounding after “RESULT OK”
display in the lower row on the LCD upon
completion of flash memory update
Jump to initial
Summary of Contents for OKIFAX OF5900
