Oki OKIFAX OF5900, Maintenance Manual

Page: 177 / 472

OKIFAX 5700/5900 2 - 87
No. Item Specifications
Determine a DP pulse rate used at call origination.
1) Setting values
10pps/16pps/20pps selectable
* Selection is skipped over when the ISDN board is
mounted.
(selection allowed if SERVICE BIT=ON)
Set a DP make ratio at used at call origination.
1) Setting values
33%/39%/40% selectable
* Selection is skipped over when the ISDN board is
mounted.
(selection allowed if SERVICE BIT=ON)
Set a DP dial type.
1) Setting values
N/10-N/N+1 selectable
N: Dial the selected number.
10-N: Dial the number obtained by subtracting the
selected number from the selected number.
N + 1: Dial the number obtained by adding 1 to the
selected number.
* Selection is skipped over when the ISDN board is
mounted.
(selection allowed if SERVICE BIT=ON)
Set the MF duration.
1) Setting values
75 ms/85 ms/100 ms selectable
* Selection is skipped over when the ISDN board is
mounted.
(selection allowed if SERVICE BIT=ON)
Determine whether the machine is to be connected to the
PBX line.
1) Setting values
ON (Connected to PBX)/ OFF (Not connected to
PBX)
* This setting cannot be made when ISDN board is
installed.
(However, this setting can be made only when the
service bit is set to ON.)
46 Pulse Dial Rate
47 Pulse Make Ratio
48 Pulse Dial Type
49 MF (Tone) Duration
50 PBX Line
Table 2.9.5.4 Dial Options (2/3)