Oki OKIFAX OF5900, Maintenance Manual

Page: 176 / 472

OKIFAX 5700/5900 2 - 86
Table 2.9.5.4 Dial Options (1/3)
No. Item Specifications
40 Redial tries
41 Redial Interval
42 Auto Start
43 Dial Tone Detect
44 Busy Tone Detect
45 MF/DP
Sets on the redial tries to meet the regulations of the
installed country.
1) Setting values
Country code =
Other than FRE: 0-10 (in one-try steps)
FRE:
1-5 (in one-tray steps)
Set an automatic redialing interval to meet the regula-
tions of installed country.
1) Setting values
Country code =
Other than FRE: 1-6 (in one-minute steps)
FRE:
1-12 (in one-minute steps)
Determine whether a call is to be originated automati-
cally without pressing the START key after specifying a
destination with a speed dial key.
1) Setting values
ON (Automatic origination)/OFF (Call is not origi-
nated until START key is pressed)
Determine whether a dial tone is to be detected.
1) Setting values
ON (Detected)/OFF (Not detected)
* Selection is skipped over when the ISDN board is
mounted.
(selection allowed if SERVICE BIT=ON)
Determine whether a busy tone is to be detected.
1) Setting values
ON (Detected)/OFF (Not detected)
* Selection is skipped over when the ISDN board is
mounted.
(selection allowed if SERVICE BIT=ON)
Determine whether MF or DP is to be used for call
origination.
1) Setting values
MF (Tone)/DP (Pulse)
* Selection is skipped over when the ISDN board is
mounted.
(selection allowed if SERVICE BIT=ON)