Oki OKIFAX OF5900, Maintenance Manual

Page: 184 / 472

OKIFAX 5700/5900 2 - 94
No. Item Specifications
62 T/F Timer Programming
63 Continuous Tone
64 PC/FAX Switch
65 CNG Count
66 Ring Response
Set the time till start of automatic reception when the
operator has performed no operation for the call termi-
nated in the TEL/FAX mode.
1) Setting values
20SEC/35SEC selectable
* Selection is skipped over when the ISDN board is
mounted.
(selection allowed if SERVICE BIT=ON)
Set up the reception completion buzzer.
The buzzer sound can be stopped by pressing the STOP
key.
1) Setting values
ON: Sounded
OFF: Not sounded
Determine whether the FAX reception mode is to be
selected automatically when PC reception is impossible.
1) Setting values
ON: Selects the FAX reception mode.
Fax transfers received faxes directly to PC.
OFF: Does not select the FAX reception mode (re-
ception disabled).
Fax receives and prints the nessage.
When T/F, TAD, or Parallel pickup is operating in CNG
signal detection processing, this setting can be shifted to
the facsimile reception mode at the time of number of
CNG signal detection times are equal to the set values.
1) Setting values:
1 -5 (in one-tray steps)
* Selection is skipped over when the ISDN board is
mounted.
(selection allowed if SERVICE BIT=ON)
Sets the time from arrival of a ring to line seizure
1) Setting values
1 ring/5 sec/10 sec/15 sec/20 sec selectable
* Selection is skipped over when the ISDN board is
mounted.
(selection allowed if SERVICE BIT=ON)
Table 2.9.5.5 Incoming Options (2/3)