Oki OKIFAX OF5900, Maintenance Manual

Page: 450 / 472

OKIFAX 5700/5900 G - 1
1. General
1.1 Application
This specification applies to the OKIFAX 5700/5900, an MFP unit capable of two-way commu-
nication using the parallel port as its standard feature.
1.2 General
This specification describes the details of PC loading through the Centro connector provided in
the OKIFAX 5700/5900.
The functions covered are for loading by each of default data, flash memory program and
language areas, which are equivalent to those of the existing HSLS.
1.3 Note on Explanation
The terms used herein shall be interpreted as follows unless specified otherwise.
1.4 Related Document
FX-056/176 Product Specification
Term Explanation
Transfer Transmission from the PC to the MFP
Receiving Receiving from the PC to the MFP
Loading data Data in general that is transferred from the PC to the MFP
Loading program Program for receiving the data actually loaded to the MFP
Transfer Data transfer from the MFP to the G4 board
MFP main unit Main unit of the MFP excluding the option board
MFP system Whole MFP system including the option board
G4 board PC
loading data Data transferred from the PC to the MFP, that is, a G4
board loader or a G4 board program to be loaded
G4 board loading
program Program that runs in the G4 board’s DRAM to receive the
G4 board program from the MFP main unit.