Oki OKIFAX OF5900, Maintenance Manual

Page: 193 / 472

OKIFAX 5700/5900 2 - 103
Table 2.9.5.7 LAN Options (1/2)
No. Item Specifications
80 Auto Tray Switch
81 Paper Size Check
82 LAN Print Timeout
83 IP Address
Determine whether the current tray is automatically
switched to another tray when the current tray runs out of
paper in the LAN print mode.
This setting can be made only when the second tray is
installed.
1) Setting values
ON: Switched
OFF: Not switched
Determine whether the set paper size is to be checked
against the host-specified paper size in the LAN print
mode.
1) Setting values
ON: Checked
OFF: Not checked
* If the two paper sizes do not match, the machine
takes the following action:
ON:
Issues a paper request directly before start-
ing printing and detects the paper size and
jam after starting printing.
OFF: Does not issues a paper request directly
before starting printing nor detect the paper
size and jam after starting printing.
Set the time from job start to job end during which image
data storage in the image memory (from LAN) should be
completed. If this time is expired, LAN printing will be
interrupted.
1) Setting values
5 sec/30 sec/5 min selectable
Display the IP address from the NIC, check the data from
the terminal, and change the setting.
1) Setting values
32 bits are divided into four 8-bit decimal values for
setting.
The decimal values are separated by dots as shown
below.
[206.181.233.105]
* If a LAN option is installed, this setting cannot be
made when an HSP error has occurred.
* This setting cannot be made when not supported
by NIC card.