Oki OKIFAX 5780 User Manual Download Page 62

Page: 62 / 256

OKIFAX 5780/5980

Setting Basic Features

Setting the Language

Press Menu/Exit to enter the menu.

Using the numeric keys (0-9), enter speed access number
13.

Select the language you want to appear on the display
panel.

Press Menu/Exit to return to standby mode.

Setting the Date and Time

Follow these instructions to set the date and time.

Press Menu/Exit to enter the menu.

Using the numeric keys (0-9), enter speed access number
00. The display shows:

5950_56.eps

Enter the current date (xx/xx/xxxx) and time (hh:mm)
using the numeric keys (0-9). Press Enter.

If invalid data is entered, the Enter key will not operate.

Press Menu/Exit to return to standby mode.

Summary of Contents for OKIFAX 5780

































































































































































































































































Search results

Summary of Contents for OKIFAX 5780

Reviews:

Related manuals for OKIFAX 5780

Brands by name

Popular brands

Oki OKIFAX 5780, User Manual

Search results

Summary of Contents for OKIFAX 5780

Reviews:

Related manuals for OKIFAX 5780

Brands by name

Popular brands