manualshive.com logo in svg

Oki OKIFAX 5780, User Manual, Page: 189 / 256

Share
Download
Oki OKIFAX 5780 User Manual Download Page 189

|

User’s Guide:  English

189

Broadcast Confirmation Report

Use this report to confirm the results of a multiple-location
transmission ( broadcast). Information provided on this report
includes:

·

The date and time at which the broadcast started.

·

The total amount of time used to complete the broadcast.

·

For each location, the Location ID, the number of pages
sent and the result of the communication.

·

Department codes (D.CODE) when the Department Code
Setting (Speed Access Number 6) is set to ON.

Printing the Broadcast Confirmation
Report

1

Press Menu/Exit to enter the menu.

2

Press 

 or

 

to select 

Report Print

. Press Enter.

3

Press 

 or

 

until the report you want appears on the

display.  Press Enter.

4

Print all the reports you want.  Then, press Menu/Exit to
return to standby mode.

Summary of Contents for OKIFAX 5780

































































































































































































































































Reviews:

No comments