|
OKIFAX 5780/5980
118
Programming a Group
!
The locations you use to create a group MUST BE
programmed as One-Touch, 2-digit, or 3-digit Speed
Dials before you create a group. Refer to
“Programming Speed Dial Numbers.”
Print the Group Directory Report before programming
a Group. This report is a reference of group numbers
already programmed. See “Reports, Group
Directories.”
1
Press Menu/Exit to enter the Menu.
2
Press
to select
Location Program
. Press Enter.
3
The cursor will be at
Speed Dial
. Press
to select
Group.
Press Enter.
4
Input a group dial number (from 1-20). Press Enter.
5
Enter locations by pressing either a One-Touch key or
the Speed Dial number. Press Enter. Continue until all
locations are entered. Press Start.
6
Enter a Group ID (name). Press Enter.
7
Press Menu/Exit to return to standby mode.
