43967002TH Rev.1
230 /
Oki Data CONFIDENTIAL
5. Maintenance Menu
5.8.4 Pulse Make Ratio
Value
Default
Display condition
Default for countries
33%
39%
40%
For the value that is used
when the setting value is
“Country-wise initial value”,
refer to item 5.8.9.
None
Sets the make ratio of DP (10 pps) during call.
5.8.5 MF(Tome) Duration
5.8.5.1 ON period
Value
Default
Display condition
0
1 ms
255 ms
0 (Default for countries)
For the value that is used
when the setting value is 0,
refer to item 5.8.9.
None
Sets the ON period of MF(Tone) Duration send.
When the setting value is “0”, the MC860 runs at the initial value of each country.
When the set value is except "0", the set value operates at 1 to 255m second.
5.8.5.2 OFF period
Value
Default
Display condition
0
1 ms
255 ms
0(Default for countries)
For the value that is used
when the setting value is 0,
refer to item 5.8.9.
None
Sets the OFF period of MF(Tone) Duration send.
When the setting value is “0”, the MFP runs at the initial value of each country.
When the set value is except "0", the set value operates at 1 to 255m second.
5.8.6 Colling Timer
Value
Default
Display condition
0
1 second
255 seconds
0 (Default for countries)
For the value that is used
when the setting value is 0,
refer to item 5.8.9.
None
Sets the Colling Timer. When the setting value is “0”, the MC860 runs at the initial value of
each country. When any value other than “0” is set, the Colling Timer can be selected in the
range of 1 to 255 mm.
5.8.7 Attenuator
Value
Default
Display condition
0 dB
-15 dB
Refer to item 5.8.9.
None
Sets the Attenuator. It can be set in units of 1 dB.
When the “Country code” is set to “Japan”, it can be set in the range of 8 to 15 dB.
5.8.8 MF Attenuator
Value
Default
Display condition
0 dB
-15 dB
Refer to item 5.8.9.
None
Sets the MF Attenuator.
It can be set in units of 1 dB.
