Oki MC860 MFP, Maintenance Manual

Page: 109 / 391

43967002TH Rev.1
109 /
Oki Data CONFIDENTIAL
3. Installation
When [View Information] is pressed
Item Contents
Print Count Tray 1 nnnnnnnn Indicates accumulated number of printing of
tray 1.
Tray 2 nnnnnnnn Indicates accumulated number of printing of
tray 2.
Tray 3 nnnnnnnn Indicates accumulated number of printing of
tray 3.
MP tray nnnnnnnn Indicates accumulated number of printing of
manual feed tray.
A4/Letter
Impressions
Count
Color nnnnnnnn Indicates accumulated number of color
printings after converted to the equivalent
amount of A4/Letter.
Mono nnnnnnnn I n d i c a t e s a c c u m u l a t e d n u m b e r o f
monochrome printings after converted to the
equivalent amount of A4/Letter.
The shaded portion shows the default setup value when shipped from the factory.
Item Contents
Register/
Edit Edge Erase Edge Erase OFF
ON Set default setup of selection whether
to erase or not shade that is created
in the surrounding of two-page spread
document..
The default value is what is specified by
the “Administrator setting” menu.
Width 5~50mm
(1mm/Step)
0.2~2.0inch
(0.1inch/Step) Set erasing width when erasing frame.
The default value is what is specified by
the “Administrator setting” menu.
(Display in units of mm or display in units
of inch can be switched by changing the
unit of display on the system setup).
Erase Center Erase
Center
OFF
ON Set default setup of selection whether to
erase or not shade that is created in the
center of two-page spread document..
The default value is what is specified by
the “Administrator setting” menu.
Erase Width 1~50mm
(1mm/Step)
0.1~2.0inch
(0.1inch/Step)
Set erasing width when erasing center.
The default value is what is specified by
the “Administrator setting” menu.
(Display in units of mm or display in units
of inch can be switched by changing the
unit of display on the system setup).
Contrast -3
-2
-1
0
+1
+2
+3 Set contrast of document The default
value is what is specified by the
“Administrator setting” menu.
The default value is what is specified by
the “Administrator setting” menu.
Hue -3
-2
-1
0
+1
+2
+3 Set color phase of color image.
The default value is what is specified by
the “Administrator setting” menu.
The shaded portion shows the default setup value when shipped from the factory.
Item Contents
R e g i s t e r /
Edit Saturation -3
-2
-1
0
+1
+2
+3 Set color saturation of color document.
The default value is what is specified by
the “Administrator setting” menu.
RGB -3
-2
-1
0
+1
+2
+3 Set relative amount of red, green and
blue.
The default value is what is specified by
the “Administrator setting” menu.
Delete Delete profile.