Oki Data CONFIDENTIAL
43967002TH Rev. 1
295 /
7. Troubleshooting
Displayed message
Descriptions
Fuser Unit Near Life.
Notifies the fuser unit is near its life.
Moreover, when set as "Admin Setup"-"Management"-
"System Setup"-"Near Life LED"=Disable, Alarm LED is
switched off.
Belt Unit Near Life.
Notifies the belt unit is near its life. This is a warning; thus,
printing will not stop.
Moreover, when set as "Admin Setup"-"Management"-
"System Setup"-"Near Life LED"=Disable, Alarm LED is
switched off.
Please change Fuser Unit.
Notifies the life of the fuser unit (warning).
This appears when the cover was opened and closed just
after the fuser life error occurred.
Please change Belt Unit.
Notifies the life of the belt unit (warning).
This appears when the cover was opened and closed just
after the belt life error occurred.
%COLOR% Toner Empty
Notifies the toner is empty. This is a warning only.
This appears when the cover was opened and closed just
after the toner empty error occurred.
%COLOR%
Yellow
Magenta
Cyan
Black
%COLOR% Toner not
installed.
Notifies the toner cartridge is not installed. This is a warning
only.
%COLOR%
Y
M
C
K
Displayed message
Descriptions
Please install New
%COLOR% Image Drum.
Notifies the life of the drum. This is a warning only.
This appears when the cover was opened and closed just
after the drum life error occurred.
%COLOR%
Y
M
C
K
Belt Reflex Error
Belt Reflex Check Error.
PU firmware does not notify this warning to CU firmware at
the time of Shipping Mode. Therefore, this status does not
occur in a user environment.
Density Shutter Error2
Density Adjustment Shutter Error 2. Error that does not occur
at user level.Displayed only in FactoryMode.
PU firmware does not notify this warning to CU firmware at
the time of Shipping Mode. Therefore, this status does not
occur in a user environment.
Density Shutter Error1
Density Adjustment Shutter Error 1. Error that does not occur
at user level.Displayed only in FactoryMode.
PU firmware does not notify this warning to CU firmware at
the time of Shipping Mode. Therefore, this status does not
occur in a user environment.
Density Color Calibration
Density Adjustment Color Calibration Error. Error that does
not occur at user level.Displayed only in FactoryMode.
PU firmware does not notify this warning to CU firmware at
the time of Shipping Mode. Therefore, this status does not
occur in a user environment.
Density Color Sensor Error
Density Adjustment Color Sensor Error. Error that does not
occur at user level.Displayed only in FactoryMode.
PU firmware does not notify this warning to CU firmware at
the time of Shipping Mode. Therefore, this status does not
occur in a user environment.
Density Black Calibration
Density Adjustment Black Calibration Error. Error that does
not occur at user level.Displayed only in FactoryMode.
PU firmware does not notify this warning to CU firmware at
the time of Shipping Mode. Therefore, this status does not
occur in a user environment.
