3
3-58 Preparing for Fiery Setup
ES3640e MFP EFI Configuration Guide - 58
Note:
You must configure the Fiery with the correct
Windows NT 4.0/2000/Server 2003 domain name. This is
especially important for Windows printing, also known as
SMB printing.
Note:
The Fiery does not support the Windows 2000/Server 2003
Active Directory Service. When you use the Fiery in a Windows
2000/Server 2003 server environment, assign the Fiery to a
Domain or Workgroup.
Ensuring the printer connection
Complete the following steps
before
you configure the Fiery and
the workstations that will print to the Fiery. A service technician
will have performed some initial installation.
To prepare for Fiery configuration
1. Print a printer Test Page to verify the printer is functioning
normally.
2. With the the printer turned off, connect the network cable to the
the printer, as described in
.
The network should already be installed and operational.
3. Turn on the printer.
Proceed to Fiery Setup, described in Chapter 4.
