4
4-59 Fiery Setup from the Printing Unit Control Panel
ES3640e MFP EFI Configuration Guide - 59
Setup is required the first time the MFP is turned on after
installation or if the hard disk drive has just been replaced. In this
initial Setup, you (or the service technician) choose the language
for the Printing Unit Control Panel menus and messages. If you do
not configure a particular Setup option, the Fiery uses default
settings. Make sure the settings are appropriate for the printing
environment at your site.
Fiery Setup from the Printing Unit Control
Panel
Setup performed from the Control Panel configures the Fiery to
communicate with other devices and manage print jobs sent to it.
Setup provides these groups of options:
•
Server Setup
to specify system options
•
Network Setup
to specify all the active network systems that
transmit print jobs to the Fiery
•
Parallel Setup
to determine if and how the parallel port is used
•
USB Setup
to determine if and how the USB port is used
•
Printer Setup
to specify how print jobs and queues are managed
•
PS Setup
to specify PostScript settings
•
PCL Setup
to specify PCL settings
•
Color Setup
to specify color settings
•
Job Log Setup
to specify how the Fiery handles its log of printed
jobs
•
PrintMe Setup
to specify the PrintMe settings
•
Custom Process
to specify special custom color settings
•
Change Password
to create and change the administrator
password
Chapter 4:
Performing
Setup from
the Printing
Unit Control
Panel
