5
5-120 Setting up the Fiery from a Windows Computer
ES3640e MFP EFI Configuration Guide - 120
TCP/IP
Specify TCP/IP settings. The current settings for IP address,
subnet mask, and default gateway address are displayed. For
information about setting up printing with TCP/IP, see
The Fiery requires a unique, valid IP address. You can set a static
address or specify that the Fiery obtains the IP addresses
automatically.
Note:
If you specify the DHCP or BOOTP protocol, the Fiery
restarts when you save your changes and exit Setup. Allow the
Fiery to restart and return to Idle before printing a Configuration
page or proceeding with any other operations.
To set the subnet mask, enter one of the following values:
255.0.0.0
if the IP address starts with a number less than 128
