7
7-152 Administering the Fiery
ES3640e MFP EFI Configuration Guide - 152
To set or change a password
1. Select the password you want to change.
2. Type the password in both the Enter New Password and Verify
New Password fields.
Passwords are case-sensitive and can be any combination of
letters and numbers up to 19 characters. You must enter the
password
exactly
the same way both times. The new password
remains in effect until you change it.
Caution:If you decide to set an administrator password make sure
you keep a careful note of it. If you lose or forget this password it
cannot be recovered for you, and the internal hard disk drive
containing the operating system and all settings will need to be
replaced.
To remove a password
1. Select the password you want to delete.
2. Delete the asterisks (*) in both the Enter New Password and
Verify New Password fields.
Clearing the Fiery
The Clear Server command allows you to clear all queued print
jobs from the Fiery—jobs in the Fiery Print, Hold, and Printed
queues. Jobs can also be deleted, either individually or as a group,
using the job management tools. Clear Server also clears all jobs
archived on the Fiery hard disk, the index of archived jobs, all
Fiery FreeForm masters, and the index of Fiery FreeForm masters.
To clear the Fiery, scroll through the Setup menu and choose
Clear Server. You are asked to confirm your selection. If the
Administrator password has been set, you are prompted to enter
it.
