Oki ES3640eMFP Management Manual Download Page 95

Page: 95 / 220

3-95 Archiving jobs

ES3640e MFP EFI Job Management Guide - 95

4. To archive the job externally to the Command WorkStation or

Command WorkStation

LE hard disk drive or to a device on the network, click Add.

5. Browse to the device and folder to which you want to archive the

job and click OK (Command WorkStation) or Choose (Command
Workstation LE).

The Archive Options dialog box displays external devices as
available archive volumes.

6. In Command WorkStation, if applicable, select Archive rasters in

the Archive Options dialog box.

The Archive rasters option is not available for PostScript data jobs
and jobs archived to Server Internal.

Note:

Large raster data files may take considerable time to

archive.

7. Select an archive volume and click OK.

Archived jobs appear in the Archive panel of the Jobs window.

Click to add a device

Summary of Contents for ES3640eMFP





























































































































































































































Search results

Summary of Contents for ES3640eMFP

Reviews:

Related manuals for ES3640eMFP

Brands by name

Popular brands

Oki ES3640eMFP, Management Manual

Search results

Summary of Contents for ES3640eMFP

Reviews:

Related manuals for ES3640eMFP

Brands by name

Popular brands