5
5-122 Using DocBuilder Pro
ES3640e MFP EFI Job Management Guide - 122
The Surface menu, View menu, and scroll bar appear at the
bottom of the window. These menus and controls affect the
display in the Imposition window immediately.
Switching between page view and layout view
Use the view mode buttons to switch between a page view and a
layout view of the job.
•
Preview mode
—approximates the appearance of the final
printed output very closely; for this reason, it is sometimes
called a WYSIWYG (“what you see is what you get”) preview.
•
Layout mode
—displays numbered, generic pages that allow you
to determine the location of source document pages in the
imposed job; you can rotate individual pages in a layout view.
Different viewing modes may display different sets of printer’s
marks; for more information, see the following table.
Note:
Preview mode puts more stress on your system’s processor
than Layout mode. To improve performance on slower systems,
perform most of your work in Layout mode, switching to Preview
mode only when you need to see content.
In Layout mode, you can rotate individual pages on the sheet. For
more information, see
The following table summarizes the characteristics of the Layout
and Preview modes:
Feature
Layout mode
Preview mode
Shows page content
No
WYSIWYG content
view
Quick redraw on slower
computers
Yes
No
Shows printer’s marks
Yes
Yes
Summary of Contents for ES3640eMFP
Page 1: ......
