Chapter 2. Functions
2-45
2.16 BAUD Switches
The BAUD switches at the rear of the emulator offer a choice of eight baud rates from 4800 to 115200
bps.
ON
OFF
ON
OFF
BACKUP
38400 19200 9600 4800
SETICE
48/64 CMP
Figure 2-22 BAUD Switch
The baud rate settings are as follow.
BAUD
switch
baud rate
38400
19200
9600
4800
4,800bps
OFF
OFF
OFF
ON
9,600bps
OFF
OFF
ON
OFF
19,200bps
OFF
ON
OFF
OFF
38,400bps
ON
OFF
OFF
OFF
51,200bps
ON
ON
ON
OFF
57,600bps
ON
ON
OFF
ON
76,800bps
ON
OFF
ON
ON
115,200bps
OFF
ON
ON
ON
All other serial interface parameters are fixed: 8 bits, no parity, 1 stop bit, XON/XOFF flow control.
n
Note 1
n
_______________________________________________________________________________________________________________
The IBM PC/AT and compatibles do not support the 51,200bps and 76,800bps speeds. When
turning on or resetting the Dr.63514, if an initialization message is not produced on the
dedicated debugger’s screen or a communication error occurs, lower both the Dr.63514 baud
rate setting and the dedicated debugger’s speed parameter.
_______________________________________________________________________________________________________________________________
Summary of Contents for Dr.63514
