Oki Dr.63514, User Manual, Page: 3 / 101

Copyright 1999 Oki Electric Industry Co., Ltd.
NOTICE
1. The information contained herein can change without notice owing to product and/or
technical improvements. Before using the product, please make sure that the information
being referred to is up-to-date.
2. The outline of action and examples for application circuits described herein have been
chosen as an explanation for the standard action and performance of the product. When
planning to use the product, please ensure that the external conditions are reflected in the
actual circuit and assembly designs.
3. When developing and evaluating your product, please use our product below the
specified maximum ratings and within the specified operating ranges including, but not
limited to, operating voltage, power dissipation, and operating temperature.
4. OKI assumes no responsibility or liability whatsoever for any failure or unusual or
unexpected operation resulting from misuse, neglect, improper installation, repair,
alteration or accident, improper handling, or unusual physical or electrical stress
including, but not limited to, exposure to parameters beyond the specified maximum
ratings or operation outside the specified operating range.
5. Neither indemnity against nor license of a third party's industrial and intellectual property
right, etc. is granted by us in connection with the use of product and/or the information and
drawings contained herein. No responsibility is assumed by us for any infringement of a
third party's right which may result from the use thereof.
6. The products listed in this document are intended only for use in development and
evaluation of control programs for equipment and systems. These products are not
authorized for other use (as an embedded device and a peripheral device).
7. Certain products in this document may need government approval before they can be
exported to particular countries. The purchaser assumes the responsibility of determining
the legality of export of these products and will take appropriate and necessary steps at
their own expense for these.
8. No part of the contents contained herein may be reprinted or reproduced without our prior
permission.
9.
MS-DOS is a registered trademark of Microsoft Corporation.