45530603TH Rev.2
4-28
Oki Data CONFIDENTIAL
4. TROUBLESHOOTING PROCEDURE
LCD Status Message
( represents a blank line.)
Online
indicator
Inspection
lamp
Details
Remedial
measure
Error Postscript
Blink
Varies Indicates that PostScript interpreter has
detected an error due to the following
reasons. Once this error occurs, the
received data is ignored until the job
ends. When the job is completely
received, this is automatically cleared.
The trigger of this error is detection of
either of the following:
- The job has a grammatical error.
- The page is complicated, and VM was
used up.
–
PDL Error Occurred
Blink
Varies This is the status to recognize the
analytical error that occurred in PDL
processing.
–
PDF Contains
Unsupported
Features
Blink
Varies This is a warning message displayed
when a PDF file is using a feature not
supported by the PDF converter loaded
on the printer.
The function for detecting unsupported
features comes in at several levels, and
this warning is displayed when the level
is Middle or Low. The detection levels
are specified by the PS operator.
The default setting on the standard
model is High, so this warning is actually
not displayed; when an unsupported
feature is detected, it results in a PS
error.
The message is displayed from the
point when an unsupported feature is
detected until the job is completed, with
no need of user intervention.
–
PS Memory
Overflow
Blink
Varies The PostScript interpreter detected
insufficient memory for processing the
job.
–
LCD Status Message
( represents a blank line.)
Online
indicator
Inspection
lamp
Details
Remedial
measure
%COLOR% Image
Drum Near Life
Varies
On
(Off)
Indicates that the image drum is near
the end of its life. Printing can continue
until the image drum reaches the end
of its life. When [Admin Setup] > [Panel
Setup] > [Near Life LED] is set to
[Disable], the inspection LED stays out.
%COLOR%
Yellow
Magenta
Cyan
Black
White
Clear
–
Fuser Unit Near
Life
Varies
On
(Off)
Indicates that the fuser is near the
end of its life. When [Admin Setup] >
[Panel Setup] > [Near Life LED] is set to
[Disable], the inspection LED stays out.
–
Belt Unit Near Life
Varies
On
(Off)
Indicates that the transfer belt is near
the end of its life. Because this is just
a warning, printing is not stopped.
When [Admin Setup] > [Panel Setup] >
[Near Life LED] is set to [Disable], the
inspection LED stays out.
–
Waste Toner Near
Full
Varies
On
Notifies the waste toner box is near full.
When [Admin Setup] > [Panel Setup] >
[Near Life LED] is set to [Disable], the
inspection LED stays out.
–
Non OEM Fuser
Unit Detected
Varies
On
Indicates detection of a fuser unit that is
not optimal.
Prompts
the user
to use an
optimal
fuser unit.
Incompatible Fuser
Unit
Varies
On
Indicates detection of a fuser unit that is
not optimal.
Prompts
the user
to use an
optimal
fuser unit.
Non Genuine Fuser
Unit
Varies
On
Indicates detection of a fuser unit that is
not optimal.
Prompts
the user
to use an
optimal
fuser unit.