45530603TH Rev.2
4-32
Oki Data CONFIDENTIAL
4. TROUBLESHOOTING PROCEDURE
LCD Status Message
( represents a blank line.)
Online
indicator
Inspection
lamp
Details
Remedial
measure
Registration Sensor
Error <n>
Varies
On
Color registration sensor error.
In the Shipping Mode, the PU firmware
does not notify the CU firmware of this
status; therefore, this error does not
occur in a user environment.
n
1= Station#1
2 = Station#2
3 = Station#3
4 = Station#4
5 = Station#5
Fuser Slack Sensor
Error
Varies
On
Fuser slack sensor error.
In the Shipping Mode, the PU firmware
does not notify the CU firmware of this
status; therefore, this error does not
occur in a user environment.
Job Offset Home
Error
Varies
On
Job offset home position sensor error.
The job offset function becomes
disabled, however, printing can
continue.
%TRAY% Empty
Varies
On
Indicates that the tray runs out of paper.
It is handled as a warning until the
tray that ran out paper is specified for
printing.
%TRAY%
Tray 1
Tray 2
Tray 3
Tray 4
Tray 5
Load paper
in the
indicated
tray.
%TRAY% Lift Up
Error
Varies
On
Indicates that a lift-up error has
occurred with the tray. As a result, the
status of that tray is regarded as "Paper
Empty," and printing from that tray
becomes unavailable.
Tray 1
Tray 2
Tray 3
Tray 4
Tray 5
Remove
and
reset the
cassette
of the
indicated
tray.
LCD Status Message
( represents a blank line.)
Online
indicator
Inspection
lamp
Details
Remedial
measure
%TRAY%
Overfilled
Varies
On
Indicates that there is too much paper
in the tray. This is just a warning, and
printing does not stop.
Tray 1
Tray 2
Tray 3
Tray 4
Tray 5
Remove
sheets
of paper
to the
mark on
the paper
guide.
File System is Full
Varies
On
Indicates that the file system built on
the storage device (HDD/FLASH) runs
out of free space.
Because this is a temporary warning, it
remains displayed until the end of the
job and then disappears.
Explain the
user that
no remedial
measure is
required.
File System is
Write Protected
Varies
On
Indicates that an attempt to write data
into a read-only file of the file system
built on the storage device (HDD/
FLASH) was made.
Because this is a temporary warning, it
remains displayed until the end of the
job and then disappears.
Explain the
user that
no remedial
measure is
required.
File Erasing
Varies
On
Indicates that a confidential file is being
erased.
–
Deleting Encrypted
Job
Varies
On
Indicates that deletion of an encrypted
authentication print job and storage of
a deletion request for job saving file are
being processed.
–
Erased Data Full
Varies
On
Indicates that a confidential file waiting
to be erased is full.
–