manualshive.com logo in svg

Oki C834DN, User Manual, Page: 98 / 147

Share
Download
Oki C834DN User Manual Download Page 98

- 98 -

Other Error Messages

3

3.

 

Troubleshooting

Error 

code

Message

<ATTENTION> 

indicator

Cause/Remedy

%COLOR% Toner Not Installed

Lights up

The toner cartridge of the indicated color 

is not installed correctly. Install the toner 

cartridge correctly.

%TRAY% Empty

Lights up

The indicated tray is empty.

Load the indicated size paper.

Unsupported USB Device Detected

Please detach it

Lights up

A USB device unsupported by a printer is 

connected. Remove the device.

Install Paper

MPTray

%MEDIA_SIZE%

Press ONLINE Button

Blinks

Load the paper of the size indicated in the 

MP tray, and then press the <ON LINE> 

button.

%COLOR% Waste Toner Full.Replace Toner.

Lights up

Waste toner is full. Replace with a new toner 

cartridge of the indicated color.

Collate Fail:Too Many Pages

Press ONLINE Button

Lights up

A collate print error has occurred.

Reduce the data amount. If that does not 

work, reduce the size of the print data.

File System Operation failed<nnn>

Press ONLINE Button

Lights up

An error of file system for a printer has 

occurred.

Power Off and Wait for a while

126:Condensing Error

Blinks

A condensation has occurred inside a printer. 

Turn the printer off and turn on again after 

a while.

Invalid Secure Data

Press ONLINE Button

Lights up

Invalid source data is received in an 

authentication printing and deleted. 

USB Hub Unsupported

Please detach it

Lights up

A USB hub unsupported by a printer is 

connected. Remove the hub.

Log Buffer is Full. Job Rejected

Press ONLINE Button

Lights up

Print data is deleted because the accounting 

log buffer is full. Contact a printer 

administrator and remove the log buffer.

360

Install Duplex Unit

Please see HELP for details

Blinks

A duplex unit is not installed correctly. 

Install a duplex unit in a printer correctly. 

When a duplex unit is already installed, pull 

out the unit, and then install it again.

nnn* Service Call

nnn: Error

Blinks

An error occurred inside the printer. Turn the 

printer off and then on again.

nnn* Power Off/On

nnn:Error

PC:nnnnnnnn

LR:nnnnnnnn

FR:nnnnnnnn

Blinks

A fatal error has occurred in a printer. 

Write down the indicated alphanumerical 

characters and contact your dealer.

Summary of Contents for C834DN




















































































































































Reviews:

No comments