Oki C824 User Manual Download Page 27

Page: 27 / 188

- 27 -

2. Setup

About the Power Supply

This section explains condition of the power supply and how to turn on/off the printer.

•

Power Supply Conditions

•

Connecting the Power Code

•

Turning On the Power

•

Turning Off the Power

•

What You Should Do If You Do Not Use This Machine for an Extended Period of Time

The power supply must meet the following conditions.

Voltage: 110 to 127V AC (Range 99 to 140V AC) / 220 to 240V AC (Range 198 to 264V AC)

Frequency: 50/60 Hz ± 2%

• If the power supply is unstable, use a voltage regulator.

• The maximum power consumption of the machine is 1118 W. Check that the power supply is sufficient.

• The operation that uses an uninterruptible power supply (UPS) or inverter is not guaranteed. Do not use an

uninterruptible power supply (UPS) or inverter.

Power Supply Conditions

Summary of Contents for C824





























































































































































































Search results

Summary of Contents for C824

Reviews:

Related manuals for C824

Brands by name

Popular brands

Oki C824, User Manual

Search results

Summary of Contents for C824

Reviews:

Related manuals for C824

Brands by name

Popular brands