Oki C824 User Manual Download Page 129

Page: 129 / 188

- 129 -

7. Maintenance

Press the open button (3) and open the output tray (4).

Identify the image drum to be replaced by its label color.

Remove the image drum (5) from the machine and place it on a flat surface.

• Use extra care when handling the image drum (the green cylinder), because it is fragile.

• Image drums are not locked on the printer. They can be removed just by lifting.

Unpack a new image drum and place it on the flat surface.

Remove the protective sheet and the desiccant pack.

Burns may result.

The fuser unit is extremely hot. Do not touch it.

Burns may result.

Never throw a used image drum or toner cartridge into a fire. They may explode, and

the toner inside may fly off and cause burns.

Summary of Contents for C824





























































































































































































Search results

Summary of Contents for C824

Reviews:

Related manuals for C824

Brands by name

Popular brands

Oki C824, User Manual

Search results

Summary of Contents for C824

Reviews:

Related manuals for C824

Brands by name

Popular brands