Oki C824 User Manual Download Page 95

Page: 95 / 188

- 95 -

6. Troubleshooting

Close the front cover (3).

If loading paper on MP tray, lift the paper set cover (1) and set the paper with
the print side face up.

Lower the paper set cover (1).

Task is complete.

A paper jam has occurred while feeding paper from a tray.

• If paper jams occur frequently, clean the paper feed rollers. For details, refer to "

Cleaning

This procedure uses Tray 1 as an example.

Gently pull out from the machine the paper cassette (1) for which an error is
indicated.

Remove the jammed paper.

• If paper is not jammed, feeding paper may fail. Reduce the number of sheets of paper loaded on the paper

cassette. Make sure that the paper stoppers are set in the right position.

Error Code "391", "392", "393", "394", "632", "633", "634"

Summary of Contents for C824





























































































































































































Search results

Summary of Contents for C824

Reviews:

Related manuals for C824

Brands by name

Popular brands

Oki C824, User Manual

Search results

Summary of Contents for C824

Reviews:

Related manuals for C824

Brands by name

Popular brands