Oki C7350hdn User Manual Download Page 64

Page: 64 / 719

C7350/7550 User’s Guide: Setting Up • 64

Paper (Media)

Recommendations

Labels

•

For recommended labels,

see the Handy Reference Guide

check http://my.okidata.com.

•

Only use labels designed for color laser printers and
photocopiers.

•

Labels must cover the entire carrier sheet.

•

The carrier sheet or adhesive must not be exposed to any part
of the printer.

CAUTION

Print media must be able to withstand 446°F (230°C) for
0.2 second.

Summary of Contents for C7350hdn
















































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for C7350hdn

Reviews:

Related manuals for C7350hdn

Brands by name

Popular brands

Oki C7350hdn, User Manual

Search results

Summary of Contents for C7350hdn

Reviews:

Related manuals for C7350hdn

Brands by name

Popular brands