© 2015 OJ Electronics A/S
advanced settings and read-outs:
50
W
at
erline
r
oom
s
ensor with Display -
type W
lD
t
3
Batteries
For information on batteries, see “Batteries” under “Waterline Room Sensors - Type WLTx3”.
3 sec.
Press the UP (
△
) and DOWN (
▽
) buttons simultaneously for 3 seconds. INFO will be displayed.
Continue pressing the UP(
△
) button until you reach the submenu you want.
Select the submenu with the OK (√) button.
INFO - Information
INFO allows you to view the room and floor temperatures actually measured.
The floor temperature is only shown if a floor sensor is installed.
Software
version
Room
temperature
Floor
temperature
If no sensor is installed,
“OFF” is displayed
Press the UP (
△
) or DOWN (
▽
) button to view the various read-
outs.
No changes can be made here. Use the OK (√) button to return.
sCal - temperature scale selection
Here you can chose either °C or °F temperature scale:
You can select either °C or °F as follows:
Press the UP (
△
) or DOWN (
▽
) button to change the setting. Confirm the required scale with the OK (√)
button.
ESC - Escape
Press the OK (√) button to end programming and return to normal operation.
Summary of Contents for WLM3
Page 55: ... 2015 OJ Electronics A S 55 ...
