© 2015 OJ Electronics A/S
45
W
at
erline
r
oom Contr
oller -
type W
lC
t
3
1. Press the UP (
△
) or DOWN (
▽
) button to select the channel/room.
2. Press the OK (√) button to view the ON/OFF settings.
3. Press the UP (
△
) or DOWN (
▽
) button to change the ON/OFF
settings.
4. Press the OK (√) button to return to the channel/rooms select menu.
Set the channel/room (Ch) to ON if it is to follow the settings of this room
controller.
A total of 14 channels/rooms can be controlled.
NOTE: If the channel selector (hex encoder) is set to 1 .. 14, the selected
channel will always be ON (cannot be set to OFF).
adaP - adaptive function
This function enables the thermostat to calculate when it needs to switch the heating ON to ensure that the required temperature is reached
by the set time. With a start time of 07:00, for example, the thermostat may switch ON as early as 06:00 so that the desired temperature of
25˚C is achieved by 07:00. Without this function set, the thermostat will start to heat at the time you set.
NOTE: All channels selected in the ArEA menu will follow this setting.
Press the UP (
△
) or DOWN (
▽
) button to switch between ON and OFF.
Press the OK (√) button to confirm.
EsC - Escape
Press the OK (√) button to end programming and return to the scheduled
programme.
Summary of Contents for WLM3
Page 55: ... 2015 OJ Electronics A S 55 ...