© 2015 OJ Electronics A/S
39
Everyday use of the room controller
4-Event Clock Mode
Sleep
Return
Leave
home
Wake up
W
at
erline
r
oom Contr
oller -
type W
lC
t
3
The day has been split into 4 events describing a typical day. When the room controller is in 4-event mode,
it will automatically change the temperature to the required level at the programmed times. As standard,
the room controller uses 4 events on days 1 to 5 (Monday to Friday) 2 events on days 6 and 7 (Saturday
and Sunday). Each event allows you to increase or decrease the set temperature. For information on
programming, see “Programming 4-Event Clock Time and Temperature” and “Advanced Settings and Read-
outs”.
4-event clock mode
/ automatic mode:
In automatic mode, the clock symbol (
) and one of the 4-event symbols (
) will be shown along with the
time and setpoint. For information on programming, see “Programming 4-Event Clock Time and Temperature”.
Comfort mode:
temporary override
To temporarily override any temperature in the 4-event schedule, press the UP (
△
) button once to show the temperature
in the display. Then press the UP (
△
) or DOWN (
▽
) button to increase or decrease the temperature. The display flashes
for 5 seconds, and then reverts to the time. Override will operate until the next programmed event, when the thermostat
will return to the scheduled 4-event program.
Cancelling comfort mode (temporary override)
To cancel temporary override, press the OK (√) button twice.
Manual mode:
Permanent override
During holidays, the scheduled 4-event program can be overridden. Press the OK (√) button and then the UP
(△
) or
DOWN (
▽
) button until the override temperature is set. The set temperature will remain on the display and the unit will
continue to operate to this temperature permanently.
Cancelling manual mode
To cancel permanent override, press the OK (√) button once, and the unit will resume automatic operation.
Summary of Contents for WLM3
Page 55: ... 2015 OJ Electronics A S 55 ...
