5
Ouman S203 can generate alarms for several different reasons. In the
event of an alarm, an alarm window pops up showing detailed alarm
information and a beeping alarm signal goes on, if the alarm sound is
not turned off (see page 29).
If there are several unacknowledged alarms, the latest activated
alarm is always shown in the display. As soon as all active alarms have
been acknowledged, the alarm window disappears and the alarm sig-
nal goes off.
Alarm signal of all active alarms may also be muted by pressing Esc
button. When you press Esc, the alarm signal stops and the last alarm
windows disappear from the display.
You may look into the alarms later by going to ”Alarms” > ”Active
alarms”. If an alarm has not been acknowledged, an exclamation mark
will appear in the beginning of the row.
Alarm notice
Deviation alarm
PRIO1 GROUP1
H1 Supply water=10.2 °C
Received: 08.11.2020 02:27
Press OK to acknowledge the alarm
When controller is configured, it’s possible to disable alarms. When the
alarms are disabled, the symbol will be displayed in the main menu.
Alarms are enabled in the service mode -> Alarm settings -> Alarms:
Disabled/Enabled.
Acknowledging alarms: Press OK and
the alarm sound will me muted. If the
reason for the alarm is still present,
the exclamation point in the top right
will continue to blink.
