EN-12
EXPLORER BALANCES
2.5.2
Models with AC Power Cord
For models with an AC power cord, connect the power cord to a suitable electrical grounded outlet
2.5.3
Power ON Button on EX12001, EX24001 and EX35001
The models EX12001, EX24001 and EX35001 have no AC Adapter. Just connect the power plug to a suitable
electrical outlet and press the ON button on the side of the base (see figure below).
Power ON button on the side of the base (EX12001, EX24001 and EX35001)
2.6
Connecting the Interface
Use the built-in RS-232 (10101) Port to connect either
to a
computer or a printer with a standard (straight-through) serial
cable. O
r connect using the scale’s USB ports.
Note:
For configuration and interface commands, see the
Communication Menu Settings section.
For Connecting, Configuring and Testing the Printer/Computer
Interface, and for sample Print Output Formats, see the Printing
section.
Interface connections on back of Terminal.
Thread printer cable along cable coils on bottom of balance. Or pass cable through groove near release button.
2.7
Adjusting the View Angle of the Terminal
To adjust the
Terminal display’s viewing angle, press in the Terminal Adjust buttons on both sides of the Terminal.
Power ON Button
www.
.com
1.800.561.8187
