EXPLORER BALANCES
EN-157
USB INPUT
The balance will respond to various commands sent via the interface adapter.
Terminate the following commands when with a [CR] or [CRLF].
Explorer Commands
?
print current mode, object below min-weight
0A
turn Auto-print off
SA
Auto-print on, prints on stability
CA
Continuous Auto-print
(n)A
Auto-print on 1 to 3600 second intervals (n = 1 to 3600)
C
perform span calibration
T
tare balance, same as pressing ON-ZERO
V
print software version
(Esc)R
reset balance to factory defaults
P
same as pressing PRINT
0S
print unstable data
1S
print stable data only
P
same as pressing Print
SP
print stable weight only
IP
immediate print of displayed weight (stable or unstable)
CP
Continuous print of weights
SLP
Auto-print stable non-zero weight only
SLZP
Auto-print stable non-zero weight and zero reading
xP
Auto-print on 1 to 3600 second intervals (x = 1 to 3600)
0P
turns auto-print off
PM
print current mode
M
advance to the next enabled mode
PU
print current unit
U
advance to the next enabled unit
T
same as pressing Tare
Z
same as pressing Zero
PV
print software version
Auto-Print Operation
Once Auto-Print is activated in the menu, the balance will send data as required.
To temporarily stop Auto-Printing, press PRINT.
If there is data in the print buffer the printer will finish printing this data.
A second press will resume Auto-Printing.
10.
SOFTWARE UPDATES
Ohaus is continuously improving its balance software. To obtain the latest release, please contact your Authorized Ohaus
Dealer or Ohaus Corporation.
www.
.com
1.800.561.8187
