EN-30
EXPLORER BALANCES
4.2
Parts Counting
Use this application to count samples of uniform weight. Three different modes can be selected:
Standard Counting
,
Check Counting
, or
Fill Counting.
4.2.1
Standard Parts Counting (default)
In the upper left portion of the home screen, select
Counting
.
The default (or last) Average Piece Weight (APW) is displayed.
Place objects on the pan to display the number of pieces.
The
PARTS COUNTING
-
Standard Home screen
Main Display Line
Second Display Line
Reference Fields
Application Buttons
Functions
Application Icon
Auto Optimization
improves counting accuracy:
it re-calculates the piece weight automatically as
parts are added.
By default Auto Optimization is
Off
.
4.2.1.1 Edit Settings:
To view or adjust the current settings, touch the
Edit Settings
button:
The Settings screen is now displayed.
Settings available:
APW, Sample Size, Sample Name,
Sample ID, Batch ID, Clear All.
Note:
please refer to section 4.1.1 for details about setting
Sample Name, Sample ID, Batch ID and Clear All.
Functions available:
Recalculate APW,
Return to Application
Establish an Average Piece Weight (APW)
Each time a new type of part is counted, the nominal weight of
one piece (Average Piece Weight or APW) must be established
using a small quantity of pieces. This APW is stored until
replaced by another APW.
There are two methods to establish the APW value:
1. The actual APW is known; or
2. The APW must be derived by weight. For this case the
current sample size will be used
To choose a different value, establish it beforehand, using the
Sample Size
button.
(See below.)
www.
.com
1.800.561.8187
