OHAUS Defender i-DT61PW, Instruction Manual

Page: 33 / 68

Defender 6000 Indicators EN-31
Auto Tare
[
A.
tArE ]
Set the automatic tare functionality.
Off
= automatic tare is disabled.
ON
= the first stable gross weight is tared.
ACCept
= stable gross weights within the acceptable limits are tared (in Check mode).
Accumulation
[
ACCUmM
]
Set the accumulation functionality.
OFF
= accumulation is disabled.
aUtO
= perform accumulation automatically.
mMAN
= perform accumulation manually.
ACCEPt
= perform accumulation when weights are within the acceptable limits (in Check mode).
Note: For details about accumulation, pleaser refer to Accumulation and Statistics in Weighing Mode
section .
Transaction Counter
[
t.CNt
]
The transaction counter is a seven-digit counter that tracks the total transactions. When the value reaches
9,999,999, the next transaction causes a roll-over to 0000001.
Off
= the transaction counter will not increase.
ON
= the transaction counter will increase with the additional menu item Next Transaction available.
Note: If the transaction counter is set to be ON, the count number will increase when press the Print
button.
Next Transaction Counter
[
t.NEXt
]
Set the value of the next transaction displays in the Next Transaction field.
1~999999
Key Beeper
[
K.Beep
]
Set whether the beeper is enabled when a button is pressed.
Off
= no sound
ON
= sound
Note: This setting is only avaliable for i-DT61XWE model.
Key Click Type
[
K.CLICK
]
SINGLE
= single click the button to execute operation.
dOUbLE
= double click the button to execute operation.
Note: This setting is only avaliable for i-DT61XWE model.
Beeper Signal
[bp.SIG]
Set the condition for beeper sound in Check Weighing mode.
OFF
= the beeper is disabled.
UNder
= the beeper sound is enabled when the weight is below the under value you set.
Ouer
= the beeper sound is enabled when the weight is above the over value you set.
aCCept
= the beeper sound is enabled when the weight is within the acceptable range you set.
UN-Ou
= the beeper sound is enabled when the weight is below the under value or above the over value
you set.
Note: This setting is only avaliable for i-DT61XWE model.
Check Light signal
[
L.SIGN
]
Set how the display shows in Check mode for over, under and acceptable weight.
blOCk
= the light is shown in block.
bar
= the light is shown in bar.
sEGmENt
= the light is shown in segment.
Note: This setting is only avaliable for i-DT61XWE model.